Highlights
    Product Specifications

Download Data Sheet

The ST200: One Router, All Services
Key Features
Advantages
System Design
Applications
Product Specifications

Physical
Height: 34.8 in. (88.4 cm)
Width: 17.5 in. (44 cm)
Depth: 23 in. (58 cm)
Weight: 384 lb (174 kg) fully configured
Mounting:
Front or center; 2 chassis per 7' telco rack

Network Processor Blade
Hot swappable
Up to 10 Gbps full duplex forwarding capacity
Up to 25 Mpps forwarding and processing rate
Line-rate IP forwarding for 1,000,000 prefixes
Deep packet classification and filtering for up to 128,000 policies
Policing via 64,000 two-bucket policers
Packet marking (IP precedence, DSCP, ATM CLP, Frame Relay DE, Ethernet 802.1p)
Up to 64,000 strict priority or WFQ output queues per NPB
Three levels of drop precedence per output queue (supported by WRED)
Hierarchical output bandwidth shaping
Up to 64,000 logical interfaces
Up to 128,000 labels/LSPs
Over 2,000,000 hardware counters per NPB
Packet sampling for security and flow-based accounting
Extensive tunneling support at wire speed (L2TPv3, GRE, PIM, IPv6 in IPv4)
IPv6 capable for forwarding and classification

Route Control Processor
850 MHz Intel Pentium III processor
2 MB L2 cache
1 GB SDRAM
20 GB or larger hard drive
256 MB CompactFlash drive

Power Requirements
DC input voltage: -48 VDC nominal (acceptable range of -40 VDC
through -72 VDC)
DC input current: 85 amps maximum @ -40 VDC
Power consumption: 2,700 watts

Environmental

Operating Temperature
32°F (0°C) to 104°F (40°C)

Operating Humidity
5% to 90%, noncondensing

Altitude
Up to 5,906 ft (1,800 m). Above this altitude, the maximum operating temperature is derated by 1.8°F (1°C) per 738 ft (225 m).

Shock
Meets Telcordia Zone 4 earthquake requirements

Agency Approvals

EMC/EMI
FCC Class A (USA)
VCCI Class I (Japan)
AS 3548 Class A (Australia)

ETSI (EU)
ETSI-300 386-2 Switching Equipment
includes:
- EN 55022 Class A Emissions (Europe)
- EN 61000-4-2 ESD
- EN 61000-4-3 Radiated Immunity
- EN 61000-4-4 EFT/B
- EN 61000-4-5 Surges
- EN 61000-4-6 Conducted Immunity

Safety
UL 60950
includes:
- UL 1950
- CSA 22.2-No.950
EN 60950/IEC 60950 Safety of Information Technology Equipment
IEC 60825-1 International Standard for the Safety of Laser Products
includes:
- EN 60825-1 Safety of Laser Products -
Part 1: Equipment Classification,
Requirements and User’s Guide
IEC 60825-2 International Standard for the Safety of Fiber Optic Systems
includes:
- EN 60825-2 Safety of Laser Products -
Part 2: Safety of Optical Fibre
Communication Systems

NEBS
SR-3580 NEBS, Criteria Levels (Level 3 Compliance)
GR-63-CORE: NEBS, Physical Protection
GR-1089-CORE: NEBS, EMC and Electrical
Safety for Network Telecommunications Equipment
Verizon SIT.NEBS.TE.NPI.2000.004, Revision 1

Protocols

Routing
BGP-4: Confederations, route reflectors, damping, multiprotocol extensions
MP-BGP
IS-IS: Level 1/Level 2 routing, domain-wide prefix distribution, TE extensions
OSPFv2: TE extensions
RIPv1, RIPv2

Multicast
PIM sparse mode
MBGP
IGMPv2/3

MPLS
RFC 2547bis
IETF Draft Martini
LDP: Downstream unsolicited
RSVP-TE: Fast restoral

Tunneling
GRE
L2TPv3

Scalability
10,000,000 BGP RIB-In paths
3,000+ BGP peers
3,000+ OSPF instances
64,000 IP, ATM, Frame Relay and VLAN interfaces per line card
1,000,000 global IPv4 routes per forwarding table
2,000,000+ VPN IPv4 routes per system

Copyright 2006 ECI Telecom DND, Inc. Privacy Statement