|
For the ST200 Service Edge Router
Download
Data Sheet
With its complete suite
of Physical Interface (PHY) cards, the ST200 Service Edge Router
delivers the widest range of interfaces, highest density and most
diverse multi-service support available in an edge router.
ST200 Gigabit Ethernet PHY cards offer the highest
Gigabit Ethernet density and bandwidth available on an edge router,
with up to 128 interfaces per device at speeds up to 10 Gbps.
This allows service providers to increase the number of customers
deployed per router, accelerating return on investment, while
cost-effectively scaling to higher capacities. Tiered bandwidth
support gives service providers the flexibility to increase customer
bandwidth in 10 Mbps increments.
Industry-Leading Density
ST200 Gigabit Ethernet cards provide industry-leading
density, maximizing the number of revenue-generating ports per
chassis.With a wide range of interfaces available today and more
in the future, the ST200 enables carriers to focus their investment
on revenue-generating customer ports, not router/switch interconnects.
| Card |
Per
System |
Per
Rack |
Standards |
| 4-port
Gigabit Ethernet |
32 |
64 |
802.1Q
VLANs,
802.1p prioritization, PPPoE |
| 8-port Gigabit Ethernet |
64 |
128 |
802.1Q VLANs,
802.1p prioritization,
802.3ad link aggregation, PPPoE |
| 10-port Gigabit
Ethernet |
80 |
160 |
802.1Q VLANs,
802.1p prioritization,
802.3ad link aggregation, PPPoE |
| 16-port Gigabit
Ethernet |
128 |
256 |
802.1Q VLANs,
802.1p prioritization,
802.3ad link aggregation, PPPoE |
| 1-port 10 Gigabit
Ethernet |
8 |
16 |
802.1Q VLANs,
802.1p prioritization, PPPoE |
About PHY Cards
ST200 PHY cards work in tandem with Network Processor Blades
(NPBs), high-performance, distributed packet processing and forwarding
cards. NPB cards perform hardware-based forwarding of traffic
between interfaces on the router at wire speed, along with sophisticated
Quality of Service (QoS) functions that are configurable per logical
interface, including packet classification, filtering, policing,
queuing, marking and shaping.
Advanced Ethernet Over MPLS Capabilities
ST200 Gigabit Ethernet PHY cards provide the following advanced
Ethernet over MPLS capabilities:
· VLAN switching
· 802.1p <—> MPLS
EXP mapping
· 4,096 distinct VLANs per
port — an order of magnitude greater than most Ethernet switches,
which typically support a maximum
of 1,024 or 4,096 VLANs per system
· Virtual Private LAN Service
(VPLS)
Key Features
· Hot-swappable architecture
· 802.1Q VLANs
· 802.1p prioritization
· 802.3x flow control
· Autonegotiation
· 802.3z
Gigabit Ethernet PHY Cards
| Card |
Optics |
Features |
Applications |
|
4-port Gigabit Ethernet
|
IEEE
802.3 SX (multimode/850 nm), LX (single mode/1310 nm) and
ZX (single mode/1550 nm) optics with Gigabit interface converter
(GBIC)/SC connectors |
·
Line rate throughput on all ports
· Jumbo Ethernet frames
up to 12,000 bytes
· Pluggable optics modules |
·
Aggregate customer traffic over a single port
· Deploy as a line-rate
trunk card to provide cost-effective uplinks |
| 8-port Gigabit Ethernet |
Small form-factor
pluggable (SFP)/LC connectors; support a mixture of SX (multimode/850
nm),
LX (single mode/1310 nm) and ZX (single mode/1550 nm) optics |
· Input rate limiting
· Jumbo Ethernet frames
up to 9,600 bytes
· 802.3ad link aggregation
· Pluggable optics modules
|
·
AnyRate shaping and prioritization
support customizable, per-port tiered
bandwidth services
· Reduce operational cost
and complexity
by eliminating intermediate Gigabit Ethernet switches |
| 10-port Gigabit
Ethernet |
Small form-factor
pluggable (SFP)/LC
connectors; support a mixture
of SX (multimode/850 nm), LX (single mode/1310 nm) and ZX
(single mode/1550 nm) optics |
·
Line rate throughput on all ports
· Jumbo Ethernet frames
up to 12,000 bytes
· 802.3ad link aggregation
· Pluggable optics modules |
·
High density Gigabit Ethernet aggregation
· Aggregate customer traffic
over a single port
· Deploy as a line-rate
trunk card to provide cost-effective uplinks |
| 16-port Gigabit Ethernet |
Small form-factor
pluggable (SFP)/LC
connectors; support a mixture
of SX (multimode/850 nm), LX (single mode/1310 nm) and ZX
(single mode/1550 nm) optics |
·
Input rate limiting
· Jumbo Ethernet frames
up
9,600 bytes
· 802.3ad link aggregation
· Pluggable optics modules |
·
AnyRate shaping and prioritization
support customizable, per-port tiered bandwidth services
· Reduce operational cost
and complexity
by eliminating intermediate Gigabit
Ethernet switches |
1-port
10 Gigabit Ethernet |
IEEE 802.3, long
wave (10GBase-LR or 10GBase -LW/1310 nm) and extended wave
(10GBase-ER or 10GBase-EW/1550 nm) optics with SC connectors |
·
High capacity uplink
· Line rate throughput
· Jumbo Ethernet frames
up to
12,000 bytes |
·
Ideal for providing high-speed trunk or uplink connection
to a high-capacity core |
Product Specifications
Physical
Width: 20 in. (51 cm)
Depth: 8 in. (20 cm)
| Card |
Weight |
| 4-port
Gigabit Ethernet |
5.5
lb (2.5 kg) |
| 8-port Gigabit Ethernet |
5.5 lb (2.5 kg) |
| 10-port Gigabit
Ethernet |
5.5 lb (2.5 kg) |
| 16-port Gigabit Ethernet |
5.5 lb (2.5 kg) |
| 1-port 10 Gigabit
Ethernet |
5.5 lb (2.5 kg) |
Performance
VLANs
4,096 VLANs per port
8-port/16-port Gigabit Ethernet Input
Bandwidth- Management
Features
· Up to 32 MB of packet buffering
· Per-port strict priority queuing and weighted fair queuing
(WFQ)
· Per-port input rate shaping for subrate Gigabit Ethernet
services
· Configurable minimum/maximum queue sizes
· Configurable port memory buffers
· Configurable weighted random early detection (WRED)
Environmental
Operating Temperature
32°F (0°C) to 104°F (40°C)
Operating Humidity
5% to 90%, noncondensing
Altitude
Up to 5,906 ft (1,800 m). Above this altitude, the maximum operating
temperature is derated by 1.8°F (1°C) per 738 ft (225
m).
Shock
Telcordia Zone 4 earthquake
Power Consumption
| Card |
Watts
of 48 V Power |
| 4-port
Gigabit Ethernet |
22 |
| 8-port Gigabit Ethernet |
50 |
| 10-port Gigabit
Ethernet |
60 |
| 16-port Gigabit Ethernet |
75 |
| 1-port 10 Gigabit
Ethernet |
< 65 |
LEDs
· Active
· Standby
· Fail
· Receive (RX)
· Transmit (TX)
Agency Approvals
Gigabit Ethernet PHY cards, when installed in
the ST200, meet the following agency approvals:
EMC/EMI
· FCC Class A (USA)
· VCCI Class I (Japan)
· AS 3548 Class A (Australia)
ETSI (EU)
· ETSI-300 386-2 Switching
Equipment
includes:
- EN 55022 Class A Emissions (Europe)
- EN 61000-4-2 ESD
- EN 61000-4-3 Radiated Immunity
- EN 61000-4-4 EFT/B
- EN 61000-4-5 Surges
- EN 61000-4-6 Conducted Immunity
Safety
· UL 60950
includes:
- UL 1950
- CSA 22.2-No.950
· EN 60950/IEC 60950 Safety of Information Technology Equipment
· IEC 60825-1 International Standard for the Safety of
Laser Products
includes:
- EN 60825-1 Safety of Laser Products - Part 1: Equipment Classification,
Requirements and User's Guide
· IEC 60825-2 International Standard for the Safety of
Fiber Optic Systems
includes:
- EN 60825-2 Safety of Laser Products - Part 2: Safety of Optical
Fibre Communication Systems
NEBS*
· SR-3580 NEBS, Criteria Levels
(Level 3 Compliance)
· GR-63-CORE: NEBS, Physical Protection
· GR-1089-CORE: NEBS, EMC and Electrical Safety for Network
Telecommunications Equipment
· Verizon SIT.NEBS.TE.NPI.2000.004, Revision 1
*Approval pending on the 1-port 10 Gigabit
Ethernet card
|
|
